Bush Hog 2215
Features
Construction Features
- Axle spindles are in halves for quick and economical service.
- Center section blades closely align with center section wheel to better cut the bottom of ditches.
- Grease fittings and steel bushings at axle pivot points for extended life.
- Wing free float without movement of wing hydraulic cylinder rod extends cylinder life.
- Optional distribution baffles spread grass and cornstalks to eliminate windrows.
- Improved wing design results in a clean top and no exposed structure underneath.
- Patented oil sight gauge in all three cutting gear boxes for quick and easy monitoring of oil levels.
Safety Features
- Safety Tow Chain Standard
Specifications
| MODELS | 2215 |
| CUTTING WIDTH | 15' |
| CUTTING HEIGHT | 2″ -14″ |
| CUTTING CAPACITY | 3 1/2″ |
| TRANSPORT WIDTH* | 8' 2" |
| TRANSPORT HEIGHT** | 7' 3" |
| TRANSPORT LENGTH*** | 15' 3" |
| APPROXIMATE WEIGHT (LB) | 4,700 |
| APPROXIMATE TONGUE WEIGHT (LB.) | 1,800 |
| MINIMUM TRACTOR PTO HP | 60 |
| HITCH | "PERMA-LEVEL" |
| CENTER DECK | 10GA |
| WING DECKS | 10GA |
| WING CUTTING ANGLES | 22° DOWN AND 45° UP |
| WING LEVEL ADJUSTMENT | TURNBUCKLES |
| SIDEBANDS | 1/4″ X 13 1/2″ |
| TRANSFER GEARBOX (HP) | 250 |
| CUTTING GEARBOX (HP) | 210 |
| INPUT DRIVELINE | CATEGORY 6 |
| CUTTING DRIVELINES | CATEGORY 4 |
| BLADE HOLDER | 7GA ROUND |
| BLADES | 1/2″ X 4″ |
| BLADE TIP SPEED (FPM) | 16,286 |
| AXLE SUSPENSION | SPRINGS @ EACH AXLE |
| CENTER & WING HYDRAULICS | 3 HOSES STANDARD |
| SAFETY TOW CHAIN | STANDARD |
| DISTRIBUTION BAFFLES | OPTIONAL |
| PTO DRIVELINE SUPPORT | OPTIONAL |
